Products

1/8th Buggy Cross Brace The Cross Brace is not your traditional looking buggy tire. This is another tire in the AKA line that works well at most tracks. The Cross Brace really stands out in loose to loamy track conditions. With the larger square pins and center bars you can expect this tire to deliver the power to the ground. Innovations: Tread Performance: Each tire tread is computer designed and track tested by AKA engineers and team drivers to ensure the best performance before each tire goes into production. Balance: Like AKA inserts and wheels, tire balance is critical to superior performance and it’s a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance. Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development that AKA brings to the table. In fact, AKA engineers have been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality. Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available. Compound: AKA offers 3 different long-lasting tire compounds, each of which is color-coded by a small mark on the sidewall of each tire. AKA offers soft (green), medium (blue), and hard (yellow) compounds that provide superior grip for across the entire spectrum of track conditions. For specific compound information, see our tire application chart to determine which tire is best suited to your track conditions. Weight: Re-sealable bag: AKA was the first to introduce this simple and effective packaging to the r/c car market. Each bag can hold two sets of tires and more importantly can be used over and over. The bag also helps keep them organized and out of the elements which keep the rubber at its best possible condition. Notes from the team: The Cross Brace is another tire that is often paired up with I Beams in the rear. This settup is another alternative to City Clock fronts and I Beam rears. Again this settup is used to allow the car to rotate more in the corners and give the car the forward drive out of the corners.

Part #'s: 14004V 1/8th Buggy CROSSBRACE with Insert (Super Soft Compound) 14004S 1/8th Buggy CROSSBRACE with Insert (Soft Compound) 14004M 1/8th Buggy CROSSBRACE with Insert (Medium Compound) 14004H 1/8th Buggy CROSSBRACE with Insert (Hard Compound) 14004VX 1/8th Buggy CROSSBRACE without Insert (Super Soft Compound) 14004SX 1/8th Buggy CROSSBRACE without Insert (Soft Compound) 14004MX 1/8th Buggy CROSSBRACE without Insert (Medium Compound) 14004HX 1/8th Buggy CROSSBRACE without Insert (Hard Compound) 14004VPW 1/8th Buggy CROSSBRACE Pre-Mounted, White Rims (Super Soft Compound) 14004SPW 1/8th Buggy CROSSBRACE Pre-Mounted, White Rims (Soft Compound) 14004MPW 1/8th Buggy CROSSBRACE Pre-Mounted, White Rims (Medium Compound) 14004HPW 1/8th Buggy CROSSBRACE Pre-Mounted, White Rims (Hard Compound) 14004VPY 1/8th Buggy CROSSBRACE Pre-Mounted, Yellow Rims (Super Soft Compound) 14004SPY 1/8th Buggy CROSSBRACE Pre-Mounted, Yellow Rims (Soft Compound) 14004MPY 1/8th Buggy CROSSBRACE Pre-Mounted, Yellow Rims (Medium Compound) 14004HPY 1/8th Buggy CROSSBRACE Pre-Mounted, Yellow Rims (Hard Compound) 14004VPP 1/8th Buggy CROSSBRACE Pre-Mounted, PRO-5 Rims (Super Soft Compound)